Project 3: Business Continuity Start Here In the process of enterprise risk management, a primary element is the business continuity plan (BCP), which consists of steps to continue operations should a

Project 3: Business ContinuityStart HereIn the process of enterprise risk management, a primary element is the business continuity plan (BCP), which consists of steps to continue operations should a worst-case scenario event take place. Your work on vulnerabilities, threats, and risk in the first two projects will support this.The BCP assignment will detail the following elements: resources required and defined stakeholder roles business impact analysis recommended preventative controls recovery strategies contingency plan that includes implementation and maintenance guidelines and defined procedures for testing the planGrades are determined on the ability to clearly articulate a developed, effective business continuity plan that considers relevant environmental factors and aligns with organizational objectives.This is the third of four sequential projects. There are 13 steps in this project. Begin below to review your project scenario.TranscriptCompetenciesYour work will be evaluated using the competencies listed below. 1.4: Tailor communications to the audience. 2.3: Evaluate the information in a logical and organized manner to determine its value and relevance to the problem. 9.1: Continuity Planning and Implementation: Develop, implement, and maintain a business continuity plan, ensuring alignment with organizational goals and objectives.Step 1: Review Assigned OrganizationThe process of business continuity planning addresses the preservation and recovery of business in the event of outages to normal business operations. The output of the process is the business continuity plan (BCP), an approved set of documented arrangements and procedures that enables an organization to facilitate the recovery of business operations, minimize losses, and replace or repair incurred damages as quickly as possible (Ouyang, n.d.).According to the National Institute of Standards and Technology’s Special Publication 800-34, Contingency Planning Guide for IT Systems, business continuity planning is an ongoing task, the goals of which are to (Ouyang, n.d.): sustain operations recover and resume operations protect assetsGoals of the BCP CycleIn the case of your particular organization (use the one assigned to you in CMP 610 or another organization of your choice), the company may have an existing BCP. However, in your organization, as with many others, the BCP was written, put on the shelf, and rarely, if ever, referenced unless an emergency required implementation.Knowing this, conduct operations as if there were no existing plan and create a new plan.The next step will involve planning for the BCP, including establishing a need and defining a scope.ReferencesOuyang, A. (n.d.). CISSP common body of knowledge: Business continuity & disaster recovery planning domain. http://opensecuritytraining.info/CISSP-9-BCDRP_files/9-BCP+DRP.pdfStep 2: Define the ScopeIn the first step, you reviewed BCP methodologies. You are now ready to continue the first part of the planning process, which involves establishing the need for a BCP and defining an appropriate scope for the company outlined in the scenario.The BCP should address aspects of business continuity, business recovery, contingency planning, disaster recovery, and related activities. Focus on those elements that are adequate and expedient, based on your risk assessment for the enterprise.Governmental agencies are required to develop an enterprise continuity of operations program (COOP). A COOP is a detailed framework that documents how the agency will ensure that essential functions continue through an emergency situation until normal operations can resume. Outside of federal, state, and local government, enterprises call that kind of framework a BCP. Both COOPs and BCPs are created to help organizations recover from disasters.Consider what aspects of business continuity the BCP will address, such as business recovery, contingency planning, and disaster recovery. Submit a brief description for feedback (one page or less) of the topic areas to be covered in the BCP.Submission for Project 3: BCP ScopePrevious submissions0Drop files here, or click below.Add FilesIn the next step, you will use a risk management framework to put together a business impact analysis.Step 3: Conduct a Business Impact AnalysisYou’ve defined the scope for the BCP. Next, use an established risk management framework to conduct a business impact analysis (BIA).The BIA provides written documentation to assist Maria and the other executives in understanding the business impact should an outage occur. Such impacts may be financial, in terms of lost revenues and additional expenses; operational, in terms of inability to deliver products and services; or even intangible, in terms of damage to the organization’s reputation and loss of public confidence.This analysis should include all departments and facilities of the enterprise, list what it would take for each to resume adequate operations to meet the needs of the enterprise, and must include each phase of the recovery activities.Remember, a key element to “business impact” is the financial aspect. What will it “cost” to take a particular action and, equally important, what could be the “cost” of inaction?Prioritization is a key to the successful recovery of operations. The sequence of activities is an essential element in your contingency planning.Use the Business Impact Analysis Template and then upload your BIA here for feedback.Submission for Project 3: Business Impact AnalysisPrevious submissions0Drop files here, or click below.Add FilesIn the next step, you will take a look at needed resources and who will be responsible for meeting those needs.Step 4: Identify Key Resources and StakeholdersAfter the BIA, the next step is to identify the key resources necessary and the stakeholders (executives and management) responsible for those resources. Remember, some resources necessary for a successful BCP might be external to the company. Be sure to include these aspects in the plan.Now that all resources and stakeholders are identified and listed, answer these two questions: What resources are needed? Who are the players?Expand the table for the BCP by including a column for accountability. With an assumed and reasonable job title, make a list of probable stakeholders responsible for execution of each recovery effort. Clearly identify their respective responsibilities during the reactivation of business processes.Use the Key Resources and Stakeholders Template to indicate key resources and stakeholders involved in the recovery for feedback.Submission for Project 3: Key Resources and StakeholdersPrevious submissions0Drop files here, or click below.Add FilesIn the next step, you will look at what can be done to prevent or reduce the impact of a significant event.Step 5: Consider Preventive ControlsAfter identifying the key stakeholders and resources, take a look at what can be put in place in advance to prevent or reduce risk. Based on previous research, plus what you have learned in the business impact analysis, what could be done to eliminate or minimize the impact of a major event? These are called preventive controls in the business process realm, or risk countermeasure implementation in technology language.Either way, the BCP should contain controls that can be classified as measures taken in advance of a catastrophe that are designed to reduce the risk of a negative impact. In the process of itemizing the controls, make sure they are properly aligned with organizational goals and the strategic direction of the enterprise.The preventative controls selected should be aligned with the organizational goals and strategies. You will list these controls in the next step.Step 6: List Preventive ControlsIn this step, you will write a description of the preventative controls that you considered in the previous step. These controls could eliminate or minimize the impact of a major event.Upload a description of the preventative controls to be used in the BCP here for feedback.Submission for Project 3: Preventive Controls ListPrevious submissions0Drop files here, or click below.Add FilesIn the next step, you will conduct research on recovery strategies.Step 7: Research Recovery StrategiesA BCP is uniquely different from a complete disaster recovery plan (DRP), neither of which is a small undertaking. Both are required to return the enterprise to 100 percent functionality. The view for the enterprise is to have one BCP that contains multiple DRPs generally broken into department or business function categories.The BCP is an overarching strategic approach to getting any business back “in” business with all mandatory functionality as soon as possible after disaster strikes. This is why the previous steps and projects have required these elements to be identified and prioritized. As such, the BCP is not as detail-oriented as the DRP and only contains DRP requirements that are absolutely mandatory to get the business back in action at the earliest opportunity.The DRP is usually more technical, very specific, and very much a necessity in today’s highly connected technology infrastructure. The DRP includes descriptions of data backup strategies, recovery sites, and postincident requirements.There will naturally be several aspects of the rebuild that might not go exactly as planned. This exercise will be to demonstrate an ability to follow multiple paths in a decision tree environment. The objective will be to create a drawing or descriptive list that follows both options to each decision of “yes” or “no” or “success” or “failure” to the reconstructive effort.Specifically, for each step, conclude with an answer to the question “was the action successful?” If “yes,” what is the next step? Or, if “no,” what is the alternative step to take next? Continue this process until you have successfully returned to operational status or determined you cannot reactivate under current circumstances. If the result of the plan is an inability to recover, the plan needs additional work to make it successful.In the next step, you will document the selected recovery strategies.Step 8: Document Recovery StrategiesNow that you have researched recovery strategies as they pertain to a BCP, list or map multiple strategic options to accomplish the recovery effort. Upload a description of the planned recovery strategies here for feedback.Submission for Project 3: Viable Recovery StrategiesPrevious submissions0Drop files here, or click below.Add FilesWhen that is complete, move to the next step, where you will consider how the contingency plan will be implemented and maintained.Step 9: Develop Implementation and Maintenance Procedures for the Contingency PlanYou’ve documented recovery strategies and are well on the way to completing the BCP. But writing a BCP is not enough. You must also have a clear plan for implementing and maintaining the BCP. Answer these questions: What resources are needed? Under what conditions, such as fire, natural disasters, occurrence of a terrorist attack, etc., will the BCP will be activated? How will stakeholders be made aware of the policies and procedures of the BCP? How will employees be trained on the plan? How often will training occur? Will there be a general training for all employees or role-based trainings for people in specific functional areas? How/where will the plan for stored for safekeeping and accessibility when needed? When and how will BCP maintenance reviews be scheduled? How will updates and changes to the plan be handled? How often will the plan be updated?In this step, begin to develop a strategy for how the BCP will be implemented and maintained. This information will be used in Step 11, in which the contingency plan will be documented. Next, you will develop testing procedures for the plan.Step 10: Develop Testing Procedures for the Contingency PlanYou’ve begun to outline your strategy for how to implement and maintain a BCP. It is also important to conduct business continuity testing to evaluate the effectiveness of a preparedness program in practice. This will give insight into whether the parts of the preparedness program will work and can help identify aspects of the BCP that work on paper but are ineffective or impractical in reality.Examples of BCP TestsTypes of Tests DescriptionStructured walk-through Step-by-step review of BCP plans with organization’s functional representativesChecklist test Functional representatives review BCP plans and check off the points that are listed to ensure concerns and activities are addressedSimulation A scenario-based practice execution of the BCP plans.Parallel test Operational test conducted at the alternate site(s).Full interruption test Full-scale operational test including shutdown of primary site and recovery of business operations at alternate site(s).Source: Ouyang, A. (n.d.). CISSP common body of knowledge: Business continuity & disaster recovery planning domain. Used under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported license. Taking time to develop, document, and test consistent processes and controls will also help you prepare for the annual audit of your information security system under any of the commonly used security and audit frameworks. Under these security and audit methodologies, auditors will gather information about the organization’s security systems, confirm that appropriate security measures are in place, and provide a report on their findings.Now develop your strategy for how the BCP will be tested. Your plan will be included in the contingency plan to be submitted in the next step.Step 11: Document the Contingency PlanYou’ve developed testing procedures. However, an effective BCP must outline how the plan will be implemented and maintained and also how it will be tested to ensure its viability in a real emergency situation. Therefore, an integral part of the BCP should be a discussion of plans for implementation and maintenance and for business continuity testing.Upload your contingency plan with a description of how the BCP will be tested and plans for ensuring the proper implementation and maintenance of the plan here for feedback.Submission for Project 3: Contingency PlanPrevious submissions0Drop files here, or click below.Step 12: Consolidate and Update Your WorkYou’ve documented testing and implementation procedures, and the plan is nearly complete. In the next step, you will submit your final BCP. Take some time now to update your work on the project to this point and make updates based on feedback received or new information uncovered.In the final step, you’ll complete and submit the BCP.Step 13: Write the Business Continuity Plan (BCP)Use the results from the previous steps to create a five- to seven-page business continuity plan. Explain the thought process of creating the specific plan steps and how each is related to business strategy considerations.Use this Business Continuity Plan Template to submit your final assignment.Check Your Evaluation CriteriaBefore you submit your assignment, review the competencies below, which your instructor will use to evaluate your work. A good practice would be to use each competency as a self-check to confirm you have incorporated all of them. To view the complete grading rubric, click My Tools, select Assignments from the drop-down menu, and then click the project title. 1.4: Tailor communications to the audience. 2.3: Evaluate the information in a logical and organized manner to determine its value and relevance to the problem. 9.1: Continuity Planning and Implementation: Develop, implement, and maintain a business continuity plan, ensuring alignment with organizational goals and objectives.Submission for Project 3: Business Continuity PlanPrevious submissions0Drop files here, or click below.

Calculate your paper price
Pages (550 words)
Approximate price: -

Why Choose Us

Quality Papers

We value our clients. For this reason, we ensure that each paper is written carefully as per the instructions provided by the client. Our editing team also checks all the papers to ensure that they have been completed as per the expectations.

Professional Academic Writers

Over the years, our Acme Homework has managed to secure the most qualified, reliable and experienced team of writers. The company has also ensured continued training and development of the team members to ensure that it keep up with the rising Academic Trends.

Affordable Prices

Our prices are fairly priced in such a way that ensures affordability. Additionally, you can get a free price quotation by clicking on the "Place Order" button.

On-Time delivery

We pay strict attention on deadlines. For this reason, we ensure that all papers are submitted earlier, even before the deadline indicated by the customer. For this reason, the client can go through the work and review everything.

100% Originality

At Graduate Assistants, all papers are plagiarism-free as they are written from scratch. We have taken strict measures to ensure that there is no similarity on all papers and that citations are included as per the standards set.

Customer Support 24/7

Our support team is readily available to provide any guidance/help on our platform at any time of the day/night. Feel free to contact us via the Chat window or support email: support@acmehomework.com.

Try it now!

Calculate the price of your order

We'll send you the first draft for approval by at
Total price:
$0.00

How it works?

Follow these simple steps to get your paper done

Place your order

Fill in the order form and provide all details of your assignment.

Proceed with the payment

Choose the payment system that suits you most.

Receive the final file

Once your paper is ready, we will email it to you.

Our Services

Graduate Assistants has stood as the world’s leading custom essay writing services providers. Once you enter all the details in the order form under the place order button, the rest is up to us.

Essays

Essay Writing Services

At Graduate Assistants, we prioritize on all aspects that bring about a good grade such as impeccable grammar, proper structure, zero-plagiarism and conformance to guidelines. Our experienced team of writers will help you completed your essays and other assignments.

Admissions

Admission and Business Papers

Be assured that you’ll definitely get accepted to the Master’s level program at any university once you enter all the details in the order form. We won’t leave you here; we will also help you secure a good position in your aspired workplace by creating an outstanding resume or portfolio once you place an order.

Editing

Editing and Proofreading

Our skilled editing and writing team will help you restructure you paper, paraphrase, correct grammar and replace plagiarized sections on your paper just on time. The service is geared toward eliminating any mistakes and rather enhancing better quality.

Coursework

Technical papers

We have writers in almost all fields including the most technical fields. You don’t have to worry about the complexity of your paper. Simply enter as much details as possible in the place order section.